Pumps for wellpoint applications

June 01, 2018

These 6" Atlas Copco WEL ECO model pumps being packed are automatic self priming units with vacuum assist and driven by 22.1 kw Deutz air cooled engines. They can handle liquids with a high quantity of air and can pump when water levels are low. A good 'well pointing' pump. Each pump is capable of flows up to 340 cu.m/hr and heads up to 27.5m. Their solids handling is 76mm. 5 No. pumps were built within a 6 week lead time. These pumps are configured as 'bloc type' , but they can also be supplied on road trailer or flex-skid packages.

Atlas Copco self priming pump



Also in News

Hidrostal Screw Centrifugal pump for vacuum sewage system
End suction Hidrostal Screw Centrifugal pumps with low NPSHr characteristics selected for a vacuum sewage system

January 15, 2019

Hidrostal Screw centrifugal pumps sized for a vacuum sewage pump system. This application required pumps that combined solids handling capabilities with low NPSH required characteristics. The design of the Hidrostal pump and impeller allow them to be used in applications where many other centrifugal solids handling pump cannot operate due to their unique 'Net Positive Suction Head required' characteristics. This also allows these pump types to lift liquids at greater depths and with longer suction pipe lines or as in this case on a pump system which draws sewage from a tank under vacuum.

View full article →

Self priming shrimp farm pump
Self priming pump for shrimp farm application

December 20, 2018

Pumpsets Ltd designed and built two self priming high flow, low head, low shear pumps with priming tanks for a shrimp farming application with all wetted parts constructed from 316 stainless steel. This method of pump priming enables higher efficiency pumps to be used which can be located above the water source removing the need for infrastructure to support and maintain alternative pumps types that require platforms or floating pontoons in order for their pump bowls to be submerged.

View full article →

Pumpsets Ltd are proud to have supported Butyl Products Ltd at the Ministry of Defence CPD Industry Awareness Day
Pumpsets Ltd are proud to have supported Butyl Products Ltd at the Ministry of Defence CPD Industry Awareness Day

November 29, 2018

Pumpsets Ltd were pleased to exhibit at the recent MOD CPD Industry training day in partnership with Butyl Products Ltd.

View full article →